Integrated with Trucker Tools

ELD for Trucker Tools Load Tracking

If a broker asked you to connect your ELD to Trucker Tools, ELD HUB does it out of the box — on vans, pickups and box trucks as well as tractors, at $15 per vehicle per month with no contract.

Quick answer

How do I connect an ELD to Trucker Tools?

Register an FMCSA-registered ELD account, install a compatible device in the vehicle's diagnostic port, then select your ELD provider inside Trucker Tools and authorise the connection. ELD HUB is fully integrated with Trucker Tools and supports PT-30 and IOSiX hardware on sprinter vans, cargo vans, pickups and box trucks. It costs $15 per vehicle per month, no contract, with a 14-day free trial and a one-time $150 device.

Last verified by ELD Hub.

FMCSA-registered1,200+ fleets$15/truck · No contract5-min self-installUS phone support + 24/7 AI

4 quick steps — personal details, company info (USDOT number and time zone required), billing address, done. About 2 minutes.

No USDOT number yet? Call 302-404-1177 and we will get your account set up manually.

What the Integration Gives You

ELD HUB is integrated with Trucker Tools

You do not need a second app or a workaround. Once your device is installed and reporting, ELD HUB can be selected as your ELD provider so duty status and vehicle location flow through for load tracking.

Every vehicle class, not just tractors

Sprinter vans, cargo vans, pickups running hotshot and box trucks of any size are supported on PT-30 and IOSiX hardware.

Tracking is what the broker is after

Trucker Tools is used by brokers to follow a load in real time instead of calling for check-ins. A connected ELD is the cleanest way to provide that, and it replaces manual location updates.

What it costs

$15 per vehicle per month, month to month, 14-day free trial, and a one-time $150 PT-30 with cable and free shipping. Already own a PT-30 or IOSiX? We re-register it free.

ELD HUB is an FMCSA-registered ELD provider and is fully integrated with Highway and Trucker Tools. If a broker or carrier-vetting platform is asking you to connect an ELD, an ELD HUB account satisfies that request — including on sprinter vans, cargo vans, box trucks and vehicles under 10,000 lbs. Month to month at $15 per vehicle, no contract, and hardware at $150 per device with free shipping.

Connecting, Step by Step

  1. 1

    Register with ELD HUB

    Four short steps in the portal, about two minutes. No USDOT number needed just to open the account.

  2. 2

    Install the device

    Plug the PT-30 into the OBD-II port (or 9-pin on a heavier chassis) and pair it with the free driver app. About 10 minutes.

  3. 3

    Select ELD HUB in Trucker Tools

    In the Trucker Tools app, choose ELD HUB as your ELD provider and authorise the connection with your ELD HUB credentials.

  4. 4

    Confirm the truck is reporting

    Drive a few miles and check that location and duty status are updating. If anything is missing, call 302-404-1177 and we will finish the connection with you.

FAQ

Does ELD HUB work with Trucker Tools?+

Yes. ELD HUB is fully integrated with Trucker Tools. Once the device is installed and reporting, you can select ELD HUB as your provider in Trucker Tools and authorise the connection so duty status and vehicle location are available for load tracking.

Why is a broker asking me to connect Trucker Tools to my ELD?+

Brokers use Trucker Tools to track a load without calling for check-ins and to confirm that the truck matches the carrier on the booking. Connecting your ELD replaces manual updates and is often a condition of taking the load.

My van is exempt from the ELD mandate. Do I still need this?+

Federally, no — a vehicle under 10,001 lbs GVWR is outside the mandate. But a broker's tracking requirement is a private access rule, and connecting a real ELD account is the standard way to meet it. ELD HUB supports vans and light trucks the same as tractors.

What does it cost to connect?+

Nothing extra. The connection is part of your ELD HUB account at $15 per vehicle per month with no contract, plus the one-time $150 PT-30 if you need hardware.

How long does setup take?+

About 10 minutes per vehicle once the device is in hand. If you already own a compatible PT-30 or IOSiX, you can be connected the same day.